Прескочи на основното съдържание

Как да попречим на Outlook да иска обмен на идентификационни данни всеки път?

Автор: Кели Последна промяна: 2014-06-26

Искали ли сте идентификационни данни за обмен при отваряне на Microsoft Outlook? Ако отговорът е да, може да забележите, че диалоговият прозорец за защита на Windows изскача при всяко стартиране на Outlook. Вижте снимката на екрана по-долу. Обикновено можете да коригирате този проблем, като проверите Запомни моите пълномощия след като въведете вашите идентификационни данни, и щракнете върху OK бутон.

В някои специални случаи обаче той иска идентификационни данни за обмен всеки път, когато стартира Microsoft Outlook, но няма опция за Запомни моето удостоверение изобщо в изскачащия диалогов прозорец за защита на Windows. (Вижте следната екранна снимка.) В тази статия ще ви насоча как да коригирате този проблем и да попреча на Microsoft Outlook да иска идентификационни данни за обмен с бързо конфигуриране на настройките на акаунта.

Раздел Office - Активирайте редактиране и сърфиране с раздели в Microsoft Office, правейки работата лесна
Kutools за Outlook - Увеличете Outlook със 100+ разширени функции за превъзходна ефективност
Увеличете своя Outlook 2021 - 2010 или Outlook 365 с тези разширени функции. Насладете се на цялостен 60-дневен безплатен пробен период и подобрете изживяването си с имейл!

За да попречите на Microsoft Outlook да иска идентификационни данни за обмен всеки път при стартиране, трябва да промените някои настройки за обмен в Настройки на акаунта. Моля, направете следното:

Стъпка 1: Отворете диалоговия прозорец Настройки на акаунта:

  1. В Outlook 2007, моля, щракнете върху Инструменти > Настройки на профила;
  2. В Outlook 2010 и 2013, моля, щракнете върху досие > Информация > Настройки на профила > Настройки на профила.

Стъпка 2: В диалоговия прозорец Настройки на акаунта,

  1. Отидете в E-mail раздел;
  2. Щракнете, за да маркирате акаунта за обмен, който изисква идентификационни данни за влизане всеки път, когато отваря Microsoft Outlook;
  3. Щракнете върху промяна бутон.

Стъпка 3: В новия диалогов прозорец на Промяна на акаунт, моля, щракнете върху Още настройки бутон.

Стъпка 4: В изскачащия диалогов прозорец на Microsoft Exchange,

  1. Отидете в Охрана раздел;
  2. Премахнете отметката от опцията за Винаги подканвайте за идентификационни данни за влизане;
  3. Щракнете върху OK бутон.

Стъпка 5: Сега се връщате към диалоговия прозорец Промяна на акаунт, моля, щракнете върху Напред бутона и завършеност бутон последователно.

Стъпка 6: Кликнете върху Близо бутон, за да излезете от диалоговия прозорец Настройки на акаунта.

След като конфигурирате настройките за защита на посочения акаунт за обмен, той повече няма да изскача диалогов прозорец и да иска идентификационни данни за обмен при отваряне на Microsoft Outlook.


Най-добрите инструменти за продуктивност в офиса

Kutools за Outlook - Над 100 мощни функции, за да заредите вашия Outlook

🤖 AI Mail Assistant: Незабавни професионални имейли с AI магия - с едно щракване до гениални отговори, перфектен тон, многоезично владеене. Трансформирайте имейла без усилие! ...

📧 Автоматизиране на имейли: Извън офиса (налично за POP и IMAP)  /  График за изпращане на имейли  /  Автоматично CC/BCC по правила при изпращане на имейл  /  Автоматично пренасочване (разширени правила)   /  Автоматично добавяне на поздрав   /  Автоматично разделяне на имейлите с множество получатели на отделни съобщения ...

📨 Управление на Email: Лесно извикване на имейли  /  Блокиране на измамни имейли по теми и други  /  Изтриване на дублирани имейли  /  подробно търсене  /  Консолидиране на папки ...

📁 Прикачени файлове ProПакетно запазване  /  Партидно отделяне  /  Партиден компрес  /  Автоматично запазване   /  Автоматично отделяне  /  Автоматично компресиране ...

🌟 Магия на интерфейса: 😊 Още красиви и готини емотикони   /  Увеличете продуктивността на Outlook с изгледи с раздели  /  Минимизирайте Outlook, вместо да затваряте ...

???? Чудеса с едно кликване: Отговорете на всички с входящи прикачени файлове  /   Антифишинг имейли  /  🕘Показване на часовата зона на подателя ...

👩🏼‍🤝‍👩🏻 Контакти и календар: Групово добавяне на контакти от избрани имейли  /  Разделете група контакти на отделни групи  /  Премахнете напомнянията за рожден ден ...

Над 100 Характеристики Очаквайте вашето проучване! Щракнете тук, за да откриете повече.

 

 

Comments (41)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
For non-experienced user

Close down outlook completely

1
Control Panel > (view by icons, not categories) > mail > Show Profiles > Add > (call it whatever you like) > change the dropdown to the new one you just created
This will recreate the profile settings and you will need to re-add your mailboxes

2
C:\users\(you username)\appdata(this is hidden so make sure you can see hidden files - google guides available for this)local\microsoft\outlook
eg
C:\users\BEN\appdata\local\microsoft\outlook
This file, rename it to "Outlookold"
(this backs up the file so we can get it back by changing the name back to "Outlook" if need be - if the fix works, delete this to save yourself some space after you're done)



3
NOW, this is the first time you should be trying to open outlook - it will take a while but should load up after recreating the configuration folder and the configuring your account - then just re-add your mailbox(es).




For experienced users
*insert disclaimer about being careful with RegEdit*

reg delete "\\%asset%\HKEY_USERS\%SID%\Software\Microsoft\Office\16.0\Outlook\Profiles\Outlook"



For super users

*insert disclaimer about being careful with RegEdit*
HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook\Profiles
locate the mail profile that's active
go to 9375CFF0413111d3b88a00104b2a6676
Find which one has the affected mailbox in "Account Name"
Note the "Service UID" - go to the binary value in the "Profile" key that we're in
in here, find the REG_BINARY for "01023d0d" and make a note of the binary - go to the binary value in the "Profile" key that we're in
Right Click > New > Binary Value

Name = 00036619
Value = 01 f0 00 80
This comment was minimized by the moderator on the site
my box is NOT checked. This is not the solution.
This comment was minimized by the moderator on the site
My laptop running Windows 8.1 and using MS Outlook 2013 has all those setting correct ie as you described them but still I getting this annoying Windows Security popup that requires me to enter password everytime I start MS Outlook. What could be another problem for this occurence.
This comment was minimized by the moderator on the site
M$ is a sack of poo. I can't believe nobody has come up with a professional mail, calendar and contacts package to rival this sack of horse sh*t. The button was already unchecked so this did not help with a recurring problem.
This comment was minimized by the moderator on the site
To me was necessary one step more:
Change the option "logon network security" to "password authentication" instead "negotiate authentication" on Exchange settings window.
This comment was minimized by the moderator on the site
How to access outlook if I forgot my credentials (Windows Security)?
This comment was minimized by the moderator on the site
Hayley... so you ticked it and THAT solved the problem, really? That doesn't make sense.
This comment was minimized by the moderator on the site
The option to click on or off to always prompt for logon credentials is grayed out and I can't select it.
This comment was minimized by the moderator on the site
so , I went in and my ' always prompt ' was also not ticked. I ticked it and it has fixed the problem.
This comment was minimized by the moderator on the site
I worked through all of these steps above, but got to the last step and the box "Always prompt for logon credentials" was already unchecked. The problem is still there.
This comment was minimized by the moderator on the site
I have the same problem.

Did you ever get yours fixed. IF so what did you do?
This comment was minimized by the moderator on the site
You need to go to Control Panel > Users > Manage Your Credentials (link on the left hand side of Windows 10 Explorer) > Windows Credentials > :

Under Generic credentials, look for "MS.Outook.15:[YOUR ACCOUNT NAME]". If there are two entries for the same account, delete the one which ends in "PUT". This should fix your problem. The problem arises where two or more entries/keys exist and Outlook does not know which one to use, so it requests on start-up of the program.



Before doing so however, I would advise you to back up your credentials.
This comment was minimized by the moderator on the site
Thanks Stu, that worked perfectly for me... although I didn't have a "PUT" entry, just 2 entries for the same account.... deleted them both and at next Outlook restart entered the correct credentials, ticked the "remember" box and worked fine ever since. Problem occurred because my exchange account had been deleted and then re-created with same e-mail and new password.
This comment was minimized by the moderator on the site
Allan, mine happened the same way! Although I was weary about deleting anything so I just updated the credentials to the new passwords and all is well in La La land!
This comment was minimized by the moderator on the site
Encountered a similar situation with an academic email account. The same password was being used according to Windows credentials, although the automatically assigned username was supposed to be "blank" according to the Windows credentials. I logged in first using the automatic username (which I could not edit without changing the account). The prompt re-appeared immediately after, although with the option to change the username. I left the username blank and entered only the password to sign in. I haven't experienced any more prompts. Thank-you for the tip!
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations